HF48

5KW

The HF48 incorporates the advanced technology of integration of the battery charge controller and the inverter under the same control system. What improves the efficiency and performance of the system to have an immediate communication between all the devices that compose it.

The inverter has pure sinusoidal wave output. Dual voltage control and fully digitalized current. Advanced MPPT technology, with efficiency not lower than 99.5% and 4 charging modes (solar priority, network priority, solar only and only network).

VPOWER

10KW

• Pure sine wave output.
• Self-consumption and Feed-in to the grid.
• Programmable supply priority for PV, Battery or Grid.
• User-adjustable battery charging current suits different types of batteries.
• Programmable multiple operation modes: Grid-tie, off-grid and grid-tie with backup.
• Built-in timer for various mode of on/off operation.
• Multiple communication for USB, RS-232, Modbus and SNMP.
• Monitoring software for real-time status display and control.
• Parallel operation up to 6 units for 10KW

TL3

50KW

The BLUEPLANET GRIDSAVE 50.0 TL3-S is a bidirectional inverter with a power of 50 kVA. Its solutions support energy suppliers, distribution network operators, EPCs and large companies in network management in order to maintain the balance between generation and consumption in the electricity grid. It is controlled by means of a main energy management system (EMS) through Sunspec Modbus TCP.

• Scalable. • Systems with energetic high availability thanks to being able to connect several inverters to the same battery. • High performance, especially in partial load. • Suitable for reactive power. • Easy to control thanks to an open communication standard

BAT-GEL

75 - 200Ah

Batteries of Gel BAT-GEL are used for solar applications, telecommunications, data centers, radio stations, solar streetlights and a long etc.

The uniform distribution of the electrolyte is achieved using silica (silicon dioxide) of high quality, to have a longer useful life.

The housing is ABS VO, flame retardant. Designed for a high life in cycles, with easy installation and without maintenance, with a 99% efficiency in the internal recombination of gases.

BAT-LI

12,8V - 12Ah

12,8V - 72Ah

25,6V - 30-36Ah

51,2V - 18Ah

Batteries of Gel BAT-GEL are used for solar applications, telecommunications, data centers, radio stations, solar streetlights and a long etc.

The uniform distribution of the electrolyte is achieved using silica (silicon dioxide) of high quality, to have a longer useful life.

The housing is ABS VO, flame retardant. Designed for a high life in cycles, with easy installation and without maintenance, with a 99% efficiency in the internal recombination of gases.

RACK-LI

51,2V • 50 - 100Ah

The RACK-LI is presented as a module in the rack format of lithium iron phosphate batteries of 100Ah and 48V, for energy storage in homes powered by solar or wind energy.

High performance and long service life (> 3,000 cycles - 80% DOD and> 10,000 cycles with 30% discharge). Based on the safest technology of lithium ferrophosphate (LiFePO4), prepared to withstand the worst conditions and maintain its capacity over the years.

These racks are equipped with BMS that includes communication RS485, RS232 and protection against short circuit, overload, overdischarge and temperature.

SAE

51,2V • 2 - 72 KWh (low-voltage battery)

768V • 77 KWh - 1 MWh (high-voltage battery)

The Energy Storage System SAE, consists of batteries (LiFePO4) in a 19 "rack mounted and connected in a standard cabinet for use with the inverters that we detail in the K-sae photovoltaic kits.

Specially designed for OFF-GRID systems from domestic applications (low-voltage) to the highest demands of energy storage (high-voltage).

These racks are equipped with BMS and communication systems based on RS485, RS232. They incorporate a LED RUN for alarm.